Skip to content

res_pjsip_endpoint_identifier_ip: Module that identifies endpoints

This configuration documentation is for functionality provided by res_pjsip_endpoint_identifier_ip.

Configuration File: pjsip.conf

[identify]: Identifies endpoints via some criteria.

This module provides alternatives to matching inbound requests to a configured endpoint. At least one of the matching mechanisms must be provided, or the object configuration is invalid.

The matching mechanisms are provided by the following configuration options:

  • match - Match by source IP address.

  • match_header - Match by SIP header.

Note

If multiple matching criteria are provided then an inbound request will be matched to the endpoint if it matches any of the criteria.

Configuration Option Reference

Option Name Type Default Value Regular Expression Description
endpoint String false Name of endpoint identified
match Custom false IP addresses or networks to match against.
match_header String false Header/value pair to match against.
srv_lookups Boolean yes false Perform SRV lookups for provided hostnames.
type None false Must be of type 'identify'.

Configuration Option Descriptions

match

The value is a comma-delimited list of IP addresses or hostnames.

IP addresses may have a subnet mask appended. The subnet mask may be written in either CIDR or dotted-decimal notation. Separate the IP address and subnet mask with a slash ('/'). A source port can also be specified by adding a colon (':') after the address but before the subnet mask, e.g. 3.2.1.0:5061/24. To specify a source port for an IPv6 address, the address itself must be enclosed in square brackets ('[2001:db8:0::1]:5060')

When a hostname is used, the behavior depends on whether srv_lookups is enabled and/or a source port is provided. If srv_lookups is enabled and a source port is not provided, Asterisk will perform an SRV lookup on the provided hostname, adding all of the A and AAAA records that are resolved.

If the SRV lookup fails, srv_lookups is disabled, or a source port is specified when the hostname is configured, Asterisk will resolve the hostname and add all A and AAAA records that are resolved.

match_header

A SIP header whose value is used to match against. SIP requests containing the header, along with the specified value, will be mapped to the specified endpoint. The header must be specified with a ':', as in 'match_header = SIPHeader: value'.

The specified SIP header value can be a regular expression if the value is of the form / regex/.

Note

Use of a regex is expensive so be sure you need to use a regex to match your endpoint.

srv_lookups

When enabled, srv_lookups will perform SRV lookups for _sip._udp, _sip._tcp, and _sips._tcp of the given hostnames to determine additional addresses that traffic may originate from.

Generated Version

This documentation was generated from Asterisk branch certified/20.7 using version GIT