features: Features Configuration¶

This configuration documentation is for functionality provided by features.

Configuration File: features.conf¶

[globals]:¶

Configuration Option Reference¶

Configuration Option Descriptions¶

atxferabort¶

This option is only available to the transferrer during an attended transfer operation. Aborting a transfer results in the transfer being cancelled and the original parties in the call being re-bridged.

atxfercomplete¶

This option is only available to the transferrer during an attended transfer operation. Completing the transfer with a DTMF sequence is functionally equivalent to hanging up the transferrer channel during an attended transfer. The result is that the transfer target and transferees are bridged.

atxferdropcall¶

When this option is set to 'no', then Asterisk will attempt to re-call the transferrer if the call to the transfer target fails. If the call to the transferrer fails, then Asterisk will wait atxferloopdelay milliseconds and then attempt to dial the transfer target again. This process will repeat until atxfercallbackretries attempts to re-call the transferrer have occurred.

When this option is set to 'yes', then Asterisk will not attempt to re-call the transferrer if the call to the transfer target fails. Asterisk will instead hang up all channels involved in the transfer.

atxferswap¶

This option is only available to the transferrer during an attended transfer operation. Pressing this DTMF sequence will result in the transferrer swapping which party he is bridged with. For instance, if the transferrer is currently bridged with the transfer target, then pressing this DTMF sequence will cause the transferrer to be bridged with the transferees.

atxferthreeway¶

This option is only available to the transferrer during an attended transfer operation. Pressing this DTMF sequence will result in the transferrer, the transferees, and the transfer target all being in a single bridge together.

pickupexten¶

In order for the pickup attempt to be successful, the party attempting to pick up the call must either have a namedpickupgroup in common with a ringing party's namedcallgroup or must have a pickupgroup in common with a ringing party's callgroup.

xfersound¶

This sound will play to the transferrer and transfer target channels when an attended transfer completes. This sound is also played to channels when performing an AMI 'Bridge' action.

[featuremap]: DTMF options that can be triggered during bridged calls¶

Configuration Option Reference¶

Configuration Option Descriptions¶

atxfer¶

The transferee parties will be placed on hold and the transferrer may dial an extension to reach a transfer target. During an attended transfer, the transferrer may consult with the transfer target before completing the transfer. Once the transferrer has hung up or pressed the atxfercomplete DTMF sequence, then the transferees and transfer target will be bridged.

automixmon¶

This will cause the channel that pressed the DTMF sequence to be monitored by the 'MixMonitor' application. The format for the recording is determined by the TOUCH_MIXMONITOR_FORMAT channel variable. If this variable is not specified, then 'wav' is the default. The filename is constructed in the following manner:

prefix-timestamp-suffix.fmt

where prefix is either the value of the TOUCH_MIXMONITOR_PREFIX channel variable or 'auto' if the variable is not set. The timestamp is a UNIX timestamp. The suffix is either the value of the TOUCH_MIXMONITOR channel variable or the callerID of the channels if the variable is not set.

automon¶

This will cause the channel that pressed the DTMF sequence to be monitored by the 'Monitor' application. The format for the recording is determined by the TOUCH_MONITOR_FORMAT channel variable. If this variable is not specified, then 'wav' is the default. The filename is constructed in the following manner:

prefix-timestamp-suffix.fmt

where prefix is either the value of the TOUCH_MONITOR_PREFIX channel variable or 'auto' if the variable is not set. The timestamp is a UNIX timestamp. The suffix is either the value of the TOUCH_MONITOR channel variable or the callerID of the channels if the variable is not set.

blindxfer¶

The transferee parties will be placed on hold and the transferrer may dial an extension to reach a transfer target. During a blind transfer, as soon as the transfer target is dialed, the transferrer is hung up.

disconnect¶

Entering this DTMF sequence will cause the bridge to end, no matter the number of parties present

parkcall¶

The parking lot used to park the call is determined by using either the PARKINGLOT channel variable or a configured value on the channel (provided by the channel driver) if the variable is not present. If no configured value on the channel is present, then '"default"' is used. The call is parked in the next available space in the parking lot.

[applicationmap]: Section for defining custom feature invocations during a call¶

The applicationmap is an area where new custom features can be created. Items defined in the applicationmap are not automatically accessible to bridged parties. Access to the individual items is controled using the DYNAMIC_FEATURES channel variable. The DYNAMIC_FEATURES is a '#' separated list of either applicationmap item names or featuregroup names.

Configuration Option Reference¶

Configuration Option Descriptions¶

¶

Each item listed here is a comma-separated list of parameters that determine how a feature may be invoked during a call

Example:

eggs = *5,self,Playback(hello-world),default

This would create a feature called 'eggs' that could be invoked during a call by pressing the '*5'. The party that presses the DTMF sequence would then trigger the 'Playback' application to play the 'hello-world' file. The application invocation would happen on the party that pressed the DTMF sequence since 'self' is specified. The other parties in the bridge would hear the 'default' music on hold class during the playback.

In addition to the syntax outlined in this documentation, a backwards-compatible alternative is also allowed. The following applicationmap lines are functionally identical:

eggs = *5,self,Playback(hello-world),default

eggs = *5,self,Playback,hello-world,default

eggs = *5,self,Playback,"hello-world",default

[featuregroup]: Groupings of items from the applicationmap¶

Feature groups allow for multiple applicationmap items to be grouped together. Like with individual applicationmap items, feature groups can be part of the DYNAMIC_FEATURES channel variable. In addition to creating groupings, the feature group section allows for the DTMF sequence used to invoke an applicationmap item to be overridden with a different sequence.

Configuration Option Reference¶

Configuration Option Descriptions¶

¶

Each item here must be a name of an item in the applicationmap. The argument may either be a new DTMF sequence to use for the item or it may be left blank in order to use the DTMF sequence specified in the applicationmap. For example:

eggs => *1

bacon =>

would result in the applicationmap items 'eggs' and 'bacon' being in the featuregroup. The former would have its default DTMF trigger overridden with '*1' and the latter would have the DTMF value specified in the applicationmap.

Generated Version¶

This documentation was generated from Asterisk branch 16 using version GIT